Author Crosstourer DCT Left Hand Rear Brake Kit SOLD  (Read 769 times)

0 Members and 3 Guests are viewing this topic.

  • Offline mad-dawg   gb

    • Crosstourer Pro  ‐    212
    • ***
    • Topic Author

    Offline mad-dawg

    • Crosstourer Pro
    • ***
    • Topic Author
    • Posts: 212
    • Bike: VFR1200XD
    • City / Town: Harrogate
    • Country: gb
    Crosstourer DCT Left Hand Rear Brake Kit SOLD
    on: Feb 02, 2024, 04.37 pm
    Feb 02, 2024, 04.37 pm
    I sold my Crosstourer last year and never got round to fitting this stuff due to lots of other goings on.
    Its everything you need to fit a left hand rear brake to your Crosstourer.
    My bike was a 2017 with the adjustable screen etc, I mention this because the handlebars are different to the older version, the Barkbusters are for this model because the end weights are different to the older model. You could probably get the end weights for 2013-2016 version and use the rest of the kit.
    Apart from the hand guards the parts should fit any year of crosstourer, the kit includes;
    New HEL brake line with banjo bolts and washers.
    Honda Silverwing master cylinder, new seal & piston kit fitted
    Teardrop adapter for rear footbrake master cylinder.
    Because the handlebars taper the existing parking brake lever was a non starter so there are 2 options included.
    Bullet brake, this replaces the banjo bolt on the master cylinder and stops the bike rolling off its stand.
    Or
    The parking brake assembly is off an ADV750 which fits to the front brake master cylinder mount, I saw that a few people with Africa twins used this method, the existing cable just needs re-routing to right handgrip instead of the left.
    See the link below for how a member here did the complete mod.

    https://www.crosstourer.com/index.php/topic,9231.0.html

    Any questions fire away and I will try and answer them.

    Now the tricky part.
    The total parts bill is embarrassing, for example the brake line kit was £66, the master cylinder £45, service kit £70, bullet brake over £200, ADV750 parking brake lever £300. etc etc.
    I cant/don’t want to remember how much the Barkbusters cost!!
    All of it is new except the master cylinder.

    Not likely to ever have a use for this stuff so how about £300 delivered?
    Last Edit: Feb 07, 2024, 03.25 pm by mad-dawg

  • Offline Hound   wales

    • Crosstourer Master  ‐    815
    • ****
      #1

    Offline Hound

    • Crosstourer Master
    • ****
    • Posts: 815
    • 2013 Crosstourer DCT Special Edition
    • Bike: '13 CT DCT SE
    • City / Town: Connah's Quay
    • Country: wales
    Re: Crosstourer DCT Left Hand Rear Brake Kit
    Reply #1 on: Feb 02, 2024, 09.05 pm
    Feb 02, 2024, 09.05 pm
    Some incoherent ramblings are nestling in your PM box, your Dawgness.