Removing a head light lamp on SC 76

[Max2007]

I want a change instrument cover as original developed some cracks!
Does anyone has a this part off servise manual or some expirience how to get to instruments  from behinde?
Sy možeš is SC76

[Hound]

Do you mean the upper half of the instrument casing is cracked?



That's expensive... part no is 37610MGHH21 and it's about €184.00.

You'd probably have to buy the entire unit if you found a used one at a dismantler's - there's one in Lithuania, but it's £399.95 (about €458). 

To get to the instrument gauges you have to take a lot of the front cowl apart. The procedure starts on page 2.10 of this section of the manual:
https://drive.google.com/file/d/1sQ-7pBUr1MzCkx2zPCAfWVnDy8vApvwy/view?usp=sharing

Once the gauges are off, two screws separate the casing halves.

Not sure how the instrument cover relates to "removing a headlight lamp", though. 

[Max2007]

Thanks Hound! I have a this part allready Justin have to install it!
Thanks for PDF but i have 2017 model SC76 i hope the procedur is similar to SC70! I wil give a try!
Ps: it is posible to buy only cover!
250eur
Greetings Max

[Hound]

Glad you already have the part you need.

Procedure should be the same apart from your windshield fitting - you'll have a height adjustment mechanism to deal with. Hopefully you can remove it without pulling it to pieces as it looks complicated.



Yes, the cover is what I showed in yellow and gave the part number for - €184 at CMS in the Netherlands.

Good luck!

[Max2007]

I also hope it is going to be without all this complications! I have to come behinde istrument cluster and unscrew few screws and put all the back!

[Hound]

Too bad you have to take so much apart just to access the instrument binnacle - which just takes a couple of screws to disassemble. 



Watch out for the switch rods that sit on the printed circuit when removing the upper half of the unit.

[Max2007]

Thanks 👍💪