1   Go Down

Author seat stuck - another one  (Read 271 times)

0 Members and 1 Guest are viewing this topic.

    • Offline Klj   gb

    • Crosstourer Member  ‐    69
    • **
    • Topic Author

    Offline Klj

    • Crosstourer Member
    • **
    • Topic Author
    • Posts: 69
    • Country: gb
    seat stuck - another one
    on: Sep 08, 2022, 04.06 pm
    Sep 08, 2022, 04.06 pm
    Hi all. There's an old thread on here on this I know.  This happened to me. The seat was / is so snug no way could I get some sort of probe in there to move the latch.  So I went in from underneath with a 25mm hole cutter ( no need to take the wheel off). Then I could see the cable mech (loose as fek) and move the latch. Re fitted the mech with loctite and closed the hole with a blanking plug. A ten minute job.  Ive attached a few pics.  I drilled small hole first to make sure I was under the latch . Cheers.  Ken




    1   Go Up
     


    Recent Topics


    arab-exile