suspension rear

[rolle]

Hi I bought a crosstourer 2017 THE PROBLEM is that I can not get it on the central support ....


I need original measurements and numbers / pictures if someone has it
Is it lowered? Has anyone measured cc on the shock absorber .And measured on
 original triangle brace between the three holes ,, or can the "dog bone" be changed .. how long should it be in the center measure
... Regars,,,R

[DE65Y]

I've seen two ways of lowering the Tourer, changing either the triangular plates or the dogbone.
I went with the Triangular plate.
So I still have the original plates.



Hope this helps.

[DE65Y]

Originally Posted by DE65Y

I've seen two ways of lowering the Tourer, changing either the triangular plates or the dogbone.
I went with the Triangular plate.
So I still have the original plates.



Hope this helps.

EDIT - Print this out borderless A4 and it should be close to 1:1 scale

[rolle]

Thanks to the fast reply,,,, Regards r

[Pickaxe]

It probably hasn't been lowered. Very few people find the CT easy to get on the main stand. Try holding and lifting from the the pillion footrest hanger rather than the pillion handle.

[rolle]

 Ok Thanks,,,
it may be that the design of the lower part makes it easier to get the Honda up with the original support, there is a greater bend on the rounding of the bent piece of metal at the bottom of the original than on the pirate supports.....r