Author snatchyness at 3000-3500 revs  (Read 919 times)

0 Members and 1 Guest are viewing this topic.

  • Offline bazza950   england

    • Crosstourer Pro  ‐    434
    • ***
    • Topic Author

    Offline bazza950

    • Crosstourer Pro
    • ***
    • Topic Author
    • Posts: 434
    • Bike: FZS600 1998
    • City / Town: whitchurch,shrop
    • Country: england
    snatchyness at 3000-3500 revs
    on: Apr 05, 2021, 07.04 am
    Apr 05, 2021, 07.04 am
    I have read posts about jerkyness and low rev fuelling snatching .My 2018 DCT has slight problem with this -at the revs i said .Its not desperate but I would appreciate advice.Is it more likely to be adjustment out - or the fuelling issue? The booster pump has some good comments but is that applicable at 3-3.5k revs ?as I say its not a big deal and an unwelcome  feature on other injected bikes but just not as smooth as say, a carb bike.

  • Offline bartho   be

    • Crosstourer Junior  ‐    14
    • *
      #1

    Offline bartho

    • Crosstourer Junior
    • *
    • Posts: 14
    • Country: be
    Re: snatchyness at 3000-3500 revs
    Reply #1 on: Apr 05, 2021, 10.05 am
    Apr 05, 2021, 10.05 am
    Clutch initialization procedure!

  • Offline bazza950   england

    • Crosstourer Pro  ‐    434
    • ***
    • Topic Author
    • #2

    Offline bazza950

    • Crosstourer Pro
    • ***
    • Topic Author
    • Posts: 434
    • Bike: FZS600 1998
    • City / Town: whitchurch,shrop
    • Country: england
    Re: snatchyness at 3000-3500 revs
    Reply #2 on: Apr 05, 2021, 11.10 am
    Apr 05, 2021, 11.10 am
    thanks Bartho explain please!

  • Offline bartho   be

    • Crosstourer Junior  ‐    14
    • *
      #3

    Offline bartho

    • Crosstourer Junior
    • *
    • Posts: 14
    • Country: be
    Re: snatchyness at 3000-3500 revs
    Reply #3 on: Apr 05, 2021, 11.46 am
    Apr 05, 2021, 11.46 am
    https://www.crosstourer.com/index.php/topic,7895.msg76134.html#msg76134

    Look at reply2 by Oskar. He posted a PDF file with the procedure.

  • Offline Showkey

    • Crosstourer Pro  ‐    144
    • ***
      #4

    Offline Showkey

    • Crosstourer Pro
    • ***
    • Posts: 144
    Re: snatchyness at 3000-3500 revs
    Reply #4 on: May 17, 2021, 01.33 pm
    May 17, 2021, 01.33 pm
    Seems like Clutch initialization procedure is often the cure all answer........but it has nothing to do with the original concern snatchyness at 3000-3500 revs.
    Clutch initialization procedure is all about the grab and slip point of the clutches.

    Similar  discussion on the snatchy.......
    Link to Prior 19 pages on the topic

    https://www.crosstourer.com/index.php/topic,7320.0.html
    Last Edit: May 17, 2021, 01.45 pm by Showkey

  • Offline bazza950   england

    • Crosstourer Pro  ‐    434
    • ***
    • Topic Author
    • #5

    Offline bazza950

    • Crosstourer Pro
    • ***
    • Topic Author
    • Posts: 434
    • Bike: FZS600 1998
    • City / Town: whitchurch,shrop
    • Country: england
    Re: snatchyness at 3000-3500 revs
    Reply #5 on: May 17, 2021, 01.47 pm
    May 17, 2021, 01.47 pm
    thanks showkey , i look forward to riding again with the new forks next months then can see if I get more used to it.Will do the clutch initialization anyway as it doesnt hurt!