Author Reset Check Engine Light  (Read 1868 times)

0 Members and 1 Guest are viewing this topic.

  • Offline Bwadkins71

    • Crosstourer Junior  ‐    2
    • *
    • Topic Author

    Offline Bwadkins71

    • Crosstourer Junior
    • *
    • Topic Author
    • Posts: 2
    • Honda Lifer
    • Bike: 2017 VFR1200x
    • City / Town: New Braunfels
    Reset Check Engine Light
    on: Nov 04, 2020, 09.25 pm
    Nov 04, 2020, 09.25 pm
    Hey Everyone,

    New user tot he site and new CT owner. I recently purchased a new (but leftover) 2017 VFR1200x standard transmission here in Texas.
    I just went over 300 miles last night. While sitting in traffic my orange Engine Light came on.

    I have ordered a service manual, but it won't be here for another week. Can someone please tell me how to reset it? I want to reset it and go for a ride and see if it comes back on.

    Thanks

  • Offline matt28   nl

    • Crosstourer Pro  ‐    178
    • ***
      #1

    Offline matt28

    • Crosstourer Pro
    • ***
    • Posts: 178
    • Bike: 2019 CT manual
    • City / Town: UK Kent/Noord NL
    • Country: nl
    Re: Reset Check Engine Light
    Reply #1 on: Nov 04, 2020, 11.30 pm
    Nov 04, 2020, 11.30 pm
    Similar procedure

    &feature=emb_logo

  • Offline Fredz   au

    • Crosstourer Pro  ‐    118
    • ***
      #2

    Offline Fredz

    • Crosstourer Pro
    • ***
    • Posts: 118
    • Country: au
    Re: Reset Check Engine Light
    Reply #2 on: Nov 05, 2020, 02.06 am
    Nov 05, 2020, 02.06 am
    Take it back to the dealer and get them is check why it came on.

  • Offline Grabcon   us

    • Crosstourer Pro  ‐    183
    • ***
      #3

    Offline Grabcon

    • Crosstourer Pro
    • ***
    • Posts: 183
    • Bike: VFR1200X
    • City / Town: Castle Rock, CO
    • Country: us
    Re: Reset Check Engine Light
    Reply #3 on: Nov 05, 2020, 01.35 pm
    Nov 05, 2020, 01.35 pm
    The reset is simple but FredZ is right let them take care of the issue. I have only had my engine light on once in 30k miles and that was self in flicked. I forgot to plug in the MAS flow after some work on the bike.

    Reset procedure.
    Cold engine start.
    do not touch the throttle, start bike
    let run until operation temp is reached.
    Light should reset

    If not bring to dealer

    It is important to no touch the throttle until operation temp is reached. The cooling fan will turn on at that point.

     



    arab-exile