Author Significant changes during production?  (Read 2075 times)

0 Members and 1 Guest are viewing this topic.

  • Offline Chill59

    • Crosstourer Junior  ‐    6
    • *
    • Topic Author

    Offline Chill59

    • Crosstourer Junior
    • *
    • Topic Author
    • Posts: 6
    Significant changes during production?
    on: Jun 21, 2020, 02.59 pm
    Jun 21, 2020, 02.59 pm
    Can anyone point me towards information regarding any significant changes during the Crosstourer's production run to date? I'm specifically interested in info on the DCT so stuff like any updates to the DCT system etc.

    TIA Chris

  • Offline Chill59

    • Crosstourer Junior  ‐    6
    • *
    • Topic Author
    • #1

    Offline Chill59

    • Crosstourer Junior
    • *
    • Topic Author
    • Posts: 6
    Re: Significant changes during production?
    Reply #1 on: Jul 02, 2020, 07.59 am
    Jul 02, 2020, 07.59 am
    So I take it there hasn't been any notable changes to the bike since it's launch?  :062:

  • Offline KLC

    • Crosstourer Member  ‐    30
    • **
      #2

    Offline KLC

    • Crosstourer Member
    • **
    • Posts: 30
    Re: Significant changes during production?
    Reply #2 on: Jul 02, 2020, 08.18 am
    Jul 02, 2020, 08.18 am
    front fairing cowl and screen is changed , ECU was remapped to meet Euro 4 i believe not sure from what year though ,

  • Offline x11   england

    • Crosstourer Pro  ‐    148
    • ***
      #3

    Offline x11

    • Crosstourer Pro
    • ***
    • Posts: 148
    • Bike: Highlander dct
    • City / Town: Lincolnshire
    • Country: england
    Re: Significant changes during production?
    Reply #3 on: Jul 02, 2020, 01.32 pm
    Jul 02, 2020, 01.32 pm
    pm sent

  • Offline thetrecker   ie

    • Crosstourer Master  ‐    1197
    • ****
      #4

    Offline thetrecker

    • Crosstourer Master
    • ****
    • Posts: 1197
    • Bike: CT Manual Red
    • Country: ie
    Re: Significant changes during production?
    Reply #4 on: Jul 02, 2020, 08.07 pm
    Jul 02, 2020, 08.07 pm
    Has X11 answered this question?
    Nothing significant like engine, driveline, bhp, wheel size has changed.
    Updates include, software update to DCT, self cancel indicators, colour changes,


    Tom

  • Offline Hartley   england

    • Crosstourer God  ‐    3085
    • *****
      #5

    Offline Hartley

    • Crosstourer God
    • *****
    • Posts: 3085
    • Bike: Crosstourer
    • City / Town: Northampton
    • Country: england
    Re: Significant changes during production?
    Reply #5 on: Jul 02, 2020, 08.39 pm
    Jul 02, 2020, 08.39 pm
    I just posted this on anotherv thread,

    Up until 2016 (i think) DCT bikes had "D" and "S" mode, 2016 (True 2016 models, not bikes registered 2016) had "D", and 3 "S" modes. I may be wrong but the models with the 3 "S" modes will also have the screen that adjust with a lever.

    To add there was some slight tweaking of the DCT around 2014 to smooth the 'box out.

  • Offline x11   england

    • Crosstourer Pro  ‐    148
    • ***
      #6

    Offline x11

    • Crosstourer Pro
    • ***
    • Posts: 148
    • Bike: Highlander dct
    • City / Town: Lincolnshire
    • Country: england
    Re: Significant changes during production?
    Reply #6 on: Jul 02, 2020, 09.03 pm
    Jul 02, 2020, 09.03 pm
    I think up to 14 if you changed gear manually when in auto mode you would then have to select auto again before you went back to automatic changes, after year 14 models you could ,for instance, change down manually a couple of gears for a corner and then open the throttle and be back in auto without re selecting it

  • Offline Hartley   england

    • Crosstourer God  ‐    3085
    • *****
      #7

    Offline Hartley

    • Crosstourer God
    • *****
    • Posts: 3085
    • Bike: Crosstourer
    • City / Town: Northampton
    • Country: england
    Re: Significant changes during production?
    Reply #7 on: Jul 02, 2020, 09.20 pm
    Jul 02, 2020, 09.20 pm
     :028: i didnt know that, had a manual first, my DCT is a 15 bike.