Author Topic: re map  (Read 5804 times)

0 Members and 1 Guest are viewing this topic.

  • Offline goggy

    • Crosstourer Junior  ‐    3
    • *
    • Topic Author

    Offline goggy

    • Crosstourer Junior
    • *
    • Topic Author
    • Posts: 3
    re map
    on: May 23, 2019, 08.40 pm
    May 23, 2019, 08.40 pm
    Hi has anyone manage to have there crosstourer remapped ??

  • Offline Jfro5867

    • Crosstourer Pro  ‐    133
    • ***
      #1

    Offline Jfro5867

    • Crosstourer Pro
    • ***
    • Posts: 133
    • Bike: 2018 model
    Re: re map
    Reply #1 on: May 25, 2019, 11.27 am
    May 25, 2019, 11.27 am
    Just wondering why you want a re-map? Its got plenty of poke as it is? Gaining a few bhp at the top end might mean you lose the stonking bottom end.

  • Offline goggy

    • Crosstourer Junior  ‐    3
    • *
    • Topic Author
    • #2

    Offline goggy

    • Crosstourer Junior
    • *
    • Topic Author
    • Posts: 3
    Re: re map
    Reply #2 on: May 26, 2019, 06.48 pm
    May 26, 2019, 06.48 pm
    hi ive been told it will make it much smoother round town and better mpg

  • Offline Jfro5867

    • Crosstourer Pro  ‐    133
    • ***
      #3

    Offline Jfro5867

    • Crosstourer Pro
    • ***
    • Posts: 133
    • Bike: 2018 model
    Re: re map
    Reply #3 on: May 27, 2019, 04.48 pm
    May 27, 2019, 04.48 pm
    Ah, ok. Not sue about any mpg improvement TBH, didn't think it was too bad for a big bike? Try adjusting all the slack out of the throttle cable, it does make a big difference. The CT does have a very direct throttle feel but you do get used to it. There's lots of discussion on here about it. Its a well trodden path.

  • Offline GADGET

    • Crosstourer Master  ‐    610
    • ****
      #4

    Offline GADGET

    • Crosstourer Master
    • ****
    • Posts: 610
    Re: re map
    Reply #4 on: May 27, 2019, 06.54 pm
    May 27, 2019, 06.54 pm
    Try Geoff at Hilltop, I know he can do it, spoke to him a while ago
    http://www.hilltopmotorcycles.co.uk

  • Offline goggy

    • Crosstourer Junior  ‐    3
    • *
    • Topic Author
    • #5

    Offline goggy

    • Crosstourer Junior
    • *
    • Topic Author
    • Posts: 3
    Re: re map
    Reply #5 on: May 27, 2019, 07.58 pm
    May 27, 2019, 07.58 pm
    well.... ive done some home work and this is my plan.... de cat delkavic exhaust ,k & n and a power commander with remap from junction 33 in Lancashire .
    est,,, 18-30 bhp 4-7 mpg improvement and much smoother

  • Offline Grabcon

    • Crosstourer Pro  ‐    181
    • ***
      #6

    Offline Grabcon

    • Crosstourer Pro
    • ***
    • Posts: 181
    • Bike: VFR1200X
    • City / Town: Castle Rock, CO
    Re: re map
    Reply #6 on: May 28, 2019, 01.20 am
    May 28, 2019, 01.20 am
    So what do you think the ROI is on all this work? Plus the potential for a couple of awards from the local police. For me and my 2016 manual over the last 12000 miles I have averaged 48.48 MPG. Personally I would never put a K&N on any vehicle. Again what's the payback? Remember your time for cleaning the thing has value.
    In The Barn
    2016 VFR1200X - Mine, 2016 BMW F700GS - The wife's bike, Brad

  • Offline Showkey

    • Crosstourer Pro  ‐    137
    • ***
      #7

    Offline Showkey

    • Crosstourer Pro
    • ***
    • Posts: 137
    Re: re map
    Reply #7 on: May 28, 2019, 01.22 pm
    May 28, 2019, 01.22 pm
    *Originally Posted by goggy [+]
    well.... ive done some home work and this is my plan.... de cat delkavic exhaust ,k & n and a power commander with remap from junction 33 in Lancashire .
    est,,, 18-30 bhp 4-7 mpg improvement and much smoother

    Estimated or This is a confirmed dyno run with 18-30 HP gains with before and after results ???????


    Last Edit: May 28, 2019, 01.26 pm by Showkey