Author Topic: Euro compliant  (Read 2522 times)

0 Members and 1 Guest are viewing this topic.

  • Offline Guy

    • Crosstourer Member  ‐    33
    • **
    • Topic Author

    Offline Guy

    • Crosstourer Member
    • **
    • Topic Author
    • Posts: 33
    • City / Town: Kilkenny
    Euro compliant
    on: Oct 28, 2018, 07.39 pm
    Oct 28, 2018, 07.39 pm
    Hi , could somebody mind shedding a bit of light on what does euro compliant mean. Apparently it came in 2016, the same year as my crosstourer of a few months now.

  • Offline Hartley   england

    • Crosstourer God  ‐    3074
    • *****
      #1

    Offline Hartley

    • Crosstourer God
    • *****
    • Posts: 3074
    • Country: england
    • Bike: Crosstourer
    • City / Town: Northampton
    Re: Euro compliant
    Reply #1 on: Oct 28, 2018, 07.48 pm
    Oct 28, 2018, 07.48 pm
    Mainly to do with emissions,  Stricter for Euro 4 ( 2016)
    I think there was also the compulsory fitting of side on reflectors and a few other bits.
    Last Edit: Oct 28, 2018, 07.52 pm by Hartley


  • Offline Guy

    • Crosstourer Member  ‐    33
    • **
    • Topic Author
    • #2

    Offline Guy

    • Crosstourer Member
    • **
    • Topic Author
    • Posts: 33
    • City / Town: Kilkenny
    Re: Euro compliant
    Reply #2 on: Oct 28, 2018, 08.02 pm
    Oct 28, 2018, 08.02 pm
    Cheers Hartley. Was thinking of aftermarket exhaust. Can u put it straight on and drive away or do modifications , like messing with sensors, mapping n stuff like that. Need to do more research I guess.

  • Offline Hartley   england

    • Crosstourer God  ‐    3074
    • *****
      #3

    Offline Hartley

    • Crosstourer God
    • *****
    • Posts: 3074
    • Country: england
    • Bike: Crosstourer
    • City / Town: Northampton
    Re: Euro compliant
    Reply #3 on: Oct 28, 2018, 08.30 pm
    Oct 28, 2018, 08.30 pm
    I’ve never gone down the aftermarket can route but as I understand it the Lambda sensor and ECU should correct fuelling as required.
    Someone on here will be able to better advise on this.
    Last Edit: Oct 28, 2018, 08.33 pm by Hartley


  • Offline Guy

    • Crosstourer Member  ‐    33
    • **
    • Topic Author
    • #4

    Offline Guy

    • Crosstourer Member
    • **
    • Topic Author
    • Posts: 33
    • City / Town: Kilkenny
    Re: Euro compliant
    Reply #4 on: Oct 28, 2018, 08.38 pm
    Oct 28, 2018, 08.38 pm
    Thanks for reply. 

  • Offline GA VFR   us

    • Crosstourer Pro  ‐    142
    • ***
      #5

    Offline GA VFR

    • Crosstourer Pro
    • ***
    • Posts: 142
    • Country: us
    • Bike: too many
    • City / Town: Alpharetta, GA
    Re: Euro compliant
    Reply #5 on: Oct 30, 2018, 01.35 am
    Oct 30, 2018, 01.35 am
    I have purchase and though not installed yet, a Delkevic full exhaust with new can minus the cat.  The instructions state "no dyno or mapping" required
    Follow your front wheel

  • Offline Guy

    • Crosstourer Member  ‐    33
    • **
    • Topic Author
    • #6

    Offline Guy

    • Crosstourer Member
    • **
    • Topic Author
    • Posts: 33
    • City / Town: Kilkenny
    Re: Euro compliant
    Reply #6 on: Oct 30, 2018, 10.13 am
    Oct 30, 2018, 10.13 am
    Ok. A full system.  Are the headder pipes thicker than original. Where is the cat in the stock exhaust,  in the silencer or where, I'm not sure. Wonder would a full system increase bhp  by much. Cheers for info.

  • Offline GA VFR   us

    • Crosstourer Pro  ‐    142
    • ***
      #7

    Offline GA VFR

    • Crosstourer Pro
    • ***
    • Posts: 142
    • Country: us
    • Bike: too many
    • City / Town: Alpharetta, GA
    Re: Euro compliant
    Reply #7 on: Oct 31, 2018, 09.20 pm
    Oct 31, 2018, 09.20 pm
    Delkevic cat less full system pictures and exhaust system parts diagram from Honda

    https://imgur.com/lgBFpA6

    https://i.imgur.com/tE6bBMy.png

    https://imgur.com/zZQWE5R
    Follow your front wheel

     



    arab-exile