Author [ES] [CA] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: Powering the accessories  (Read 10864 times)

0 Members and 1 Guest are viewing this topic.

Offline Dieselboy

  • Crosstourer Pro
  • ***
  • Posts: 113
  • Journey not Destination
  • Bike: '17 VFR1200XD
  • City / Town: Tampa
  • Country: United States
Re: Powering the accessories
« Reply #48 on: June 28, 2019, 02:31:34 PM »
I had occasion to add the upshift-cancel circuit to another VFR1200XD so I took a few pics.



This is the upshift wire.



Use a razor and scrape the insulation free.





Solder in a wire to connect to the circuit "relay".  I used 18 guage.




Scrape and solder the brown and orange wires from the main cruise control harness.






Crimp on the spades and connect to the circuit.




Pull the upshift to turn on and off the cruise control.

 :152:








 


arab-exile