Author Topic: Seat opening problem  (Read 1996 times)

0 Members and 1 Guest are viewing this topic.

Offline Jyrays

  • Crosstourer Pro
  • ***
  • Posts: 118
  • Bike: CRF1000L -16
  • Country: Europe
Seat opening problem
on: July 26, 2015, 06:02:42 PM
I cannot open my seat. It was open last time a week ago, today nothing happens when I turn the key. Anyone had similar problem?  :440:
Current: HONDA CRF1000L tricolor, Honda NC700X
Past: Honda VFR 1200X / Honda SLR 650 / Honda XLV 1000 Varadero / Honda XR 650 R / KTM 640 LC4 / Honda CB1100 / Yamaha XJ 850 / Honda CB 500...

#1

Offline Hartley

  • Crosstourer God
  • *****
  • Posts: 2956
  • Bike: Crosstourer
  • City / Town: Northampton
  • Country: England
Re: Seat opening problem
Reply #1 on: July 26, 2015, 07:50:55 PM
Going back some time ago there was a post about the screws securing the lock being loose. That in turn would cause a problem removing the seat. I checked mine at the time and they were loose. Re tightened with a drop of loctite.

This obviously isn't going to help you at the mo. All I'd suggest is put a bit of weight on the seat to easy any pull on the locking pin and keep trying. Good luck.

Paul


#2

Offline TiuSo

  • Crosstourer Pro
  • ***
  • Posts: 206
  • Bike: VFR1200XD
  • City / Town: Kangasala
  • Country: Finland
Seat opening problem
Reply #2 on: July 27, 2015, 06:57:45 AM
I had this, the screws securing the lock were loose (actually, they were gone...) and I got the seat away by pressing the front of the saddle down and back... It took time and effort to open... Hope that you'll manage it!!
TiuSo

#3

Offline ewilliamson

  • Crosstourer Junior
  • *
  • Posts: 2
  • Country: eck1960
Re: Seat opening problem
Reply #3 on: August 18, 2015, 10:07:46 AM
I had the same problem spent all day trying to get it open. took it to dealers honda newcastle they fixed it under warranty. It took them a couple of hours to strip the back end down and put it back together.

 



arab-exile