Pages: [1]   Go Down

Author Topic: rattling noise on cold startup  (Read 2912 times)

0 Members and 1 Guest are viewing this topic.

Offline mihai codin

  • Crosstourer Member
  • **
  • Posts: 93
  • Bike: vfr 1200x
rattling noise on cold startup
on: April 25, 2015, 07:02:32 PM
Hi guys! whenever i cold start i get a rattling noise like valves or something. Is it normal? It goes away when hot
Last Edit: April 27, 2015, 06:43:53 PM by mihai codin
Logged
#1

Offline mihai codin

  • Crosstourer Member
  • **
  • Posts: 93
  • Bike: vfr 1200x
Re: rattling noise on cold startup
Reply #1 on: April 27, 2015, 06:44:39 PM
doesn't anyone have rattling noise?:)
Logged
#2

Offline Farway

  • Crosstourer Master
  • ****
  • Posts: 721
  • Bike: '12 Crosstourer
  • City / Town: Durham
  • Country: UK
Re: rattling noise on cold startup
Reply #2 on: April 27, 2015, 06:51:45 PM
Do we have hydraulic cam chain tensior?
Logged
Tomorrow is promised to no one...
#3

Offline Crosstourer_pt

  • Crosstourer Member
  • **
  • Posts: 34
  • Bike: CT-Dct e CBR XX
  • City / Town: Viseu
  • Country: Portugal
Re: rattling noise on cold startup
Reply #3 on: April 27, 2015, 08:29:18 PM
My also makes that noise. Have I complained to Honda, but still did not get any response.

 I do not think normal.
Logged
#4

Offline mihai codin

  • Crosstourer Member
  • **
  • Posts: 93
  • Bike: vfr 1200x
Re: rattling noise on cold startup
Reply #4 on: April 27, 2015, 08:32:58 PM
The noise is most at idle
Logged
#5

Offline Farway

  • Crosstourer Master
  • ****
  • Posts: 721
  • Bike: '12 Crosstourer
  • City / Town: Durham
  • Country: UK
Re: rattling noise on cold startup
Reply #5 on: April 27, 2015, 08:33:45 PM
If we have hydraulic valve lifters, they will be noisy, a bit like to old Golf Mk2 GTI16 valve's were...you only knew the engine was ran in once you had the noisy clack clack on start-up!
Logged
Tomorrow is promised to no one...
#6

Offline mihai codin

  • Crosstourer Member
  • **
  • Posts: 93
  • Bike: vfr 1200x
Re: rattling noise on cold startup
Reply #6 on: April 27, 2015, 08:36:27 PM
Do we have them?
Logged
#7

Offline Gas75

  • Crosstourer Junior
  • *
  • Posts: 7
  • Bike: CROSSTOURER X
  • City / Town: ATHENS
  • Country: GREECE
Re: rattling noise on cold startup
Reply #7 on: May 02, 2015, 01:05:41 PM
The tension of the camchain Works mechanical.There is a spring which controls the tension.Also HONDA use the Uni cam the same with the CRF.The inlet valves is bucket type and the exhaust valves are with rocker arms.With this construction HONDA win space on the cylinder heads. And finally the result of this is to have a gramical and amazing power from the VFR engine.
Regarding the noise most probably need to check the exhaust valves clearances.
Last Edit: May 07, 2015, 09:22:03 AM by Gas75
Logged
Pages: [1]   

Go Up

 


Recent Topics


arab-exile