Poll

What's this bit about

??
1 (100%)
??
0 (0%)

Total Members Voted: 1

Author Topic: End Can Choice?????  (Read 3837 times)

0 Members and 1 Guest are viewing this topic.

Offline Bucko

  • Crosstourer Junior
  • *
  • Posts: 1
  • Bike: highlander 2015
  • City / Town: Newark Notts
  • Country: Uk
End Can Choice?????
on: April 21, 2015, 09:19:01 PM
Hi.. New CT Highlander here on Friday, does anyone know of a cheaper/reasonable sounding  end can other than the over priced  Akro please....

And do you also know if the 2014 can fits a 2015 bike (or has it changed )

Thanks
Regards
Pete Bucko

#1

Offline justin

  • Crosstourer Pro
  • ***
  • Posts: 141
  • Bike: DCT
  • City / Town: Cheshire
  • Country: uk
Re: End Can Choice?????
Reply #1 on: April 22, 2015, 05:56:48 AM
All models will be the same fit, there is a good choice out there from £200 to £700 but make sure that the one you go for fits with your centre stand as I know there have been issues with some brands, a search on her will bring up some good advice.

#2

Offline glen.molloy

  • Crosstourer Member
  • **
  • Posts: 17
  • Bike: Crosstourer 2014
  • City / Town: Singleton
  • Country: Australia
Re: End Can Choice?????
Reply #2 on: April 22, 2015, 08:22:28 AM
Hi Guys,

In the end I got the Honda Acro pipe.....very happy with it and for the price I got it for I couldn't resist.... :038:....beware though if you change the can yourself when you remove the original if you have a center stand it is able to touch/hit your brake line and abs senor cable........expensive little mistake on my behalf, i'll know next time......anyone remove the baffle from the acro..? not much louder but has a nice note without it.....not sure which I prefer

#3

Offline biker1300

  • Crosstourer Pro
  • ***
  • Posts: 158
  • Bike: dct highlander
  • Country: United Kingdom
Re: End Can Choice?????
Reply #3 on: April 22, 2015, 03:00:57 PM
Hi i fitted the cheapest one i could find on e bay it has a pad to stop the centre stand hitting anything and iv been told it sounds ok

#4

Offline dentonlad

  • Crosstourer Pro
  • ***
  • Posts: 116
  • Bike: VFR800X, NC700X
  • City / Town: Denton
  • Country: England
Re: End Can Choice?????
Reply #4 on: April 22, 2015, 03:27:59 PM
I fitted a Pipe Werx can. About £200.

Slightly pants videos filmed on my 'phone....

https://youtu.be/RfdIKDvYqzE

https://youtu.be/XVarX9zP9Fw

Their website is www.pipewerx.com/
Experience is the name every one gives to their mistakes - Oscar Wilde.

#5

Online Dave56

  • Crosstourer Master
  • ****
  • Posts: 1740
  • Bike: Highlander
  • City / Town: Grantham
  • Country: UK
Re: End Can Choice?????
Reply #5 on: April 22, 2015, 04:12:57 PM
  :400: along Bucko from a fellow Highlander owner from just down the A1.
"The more the miles, the bigger the smiles"

#6

Offline andyrob

  • Crosstourer Master
  • ****
  • Posts: 611
  • Bike: VFRXDCT
  • City / Town: Sunny Glasgow
  • Country: Scotland, UK
Re: End Can Choice?????
Reply #6 on: April 23, 2015, 12:07:08 PM
My vote has been cast :028:

 :030:

...and welcome Bucko. :821:

I went with a Leo Vince.Works with centresatnd.


#7

Offline Superjeap

  • Crosstourer Pro
  • ***
  • Posts: 374
  • Bike: VFR1200XD
  • Country: Netherlands
Re: End Can Choice?????
Reply #7 on: April 25, 2015, 04:16:51 PM
Laser
Arrow
Leovince
All under €500,-

 


arab-exile