Pages: [1]   Go Down

Author Topic: DCT Casing  (Read 1748 times)

0 Members and 1 Guest are viewing this topic.

Offline andyrob

  • Crosstourer Master
  • ****
  • Posts: 611
  • Bike: VFRXDCT
  • City / Town: Sunny Glasgow
  • Country: Scotland, UK
DCT Casing
on: July 03, 2013, 11:45:40 AM
Hello Folks

 Does anybody know if the plastic DCT clutch casing has anything I need to know about, behind it? Ie oil? Or is it just protection. (Done its job if it is the latter ;) )
 Going to need the part replaced and hope to do it myself.

I may post an accompanying graphic image of the damage when I get on my PC!

BOOO!

Last Edit: July 03, 2013, 07:13:41 PM by andyrob
Logged
#1

Offline marvincon

  • Crosstourer Member
  • **
  • Posts: 70
  • Bike: NC750 dct
  • City / Town: leics
  • Country: england
Re: DCT Casing
Reply #1 on: July 03, 2013, 02:58:07 PM
Two solenoid valves for the two clutches, I believe..
Logged
#2

Offline Allroadtoad

  • Crosstourer Master
  • ****
  • Posts: 606
  • Country: netherlands
Re: DCT Casing
Reply #2 on: July 04, 2013, 07:11:45 AM
look on eBay, there are several for sake there... so you don't have to buy new .
Logged
`12 VFR1200X Silver
`98 DR650SE
#3

Offline andyrob

  • Crosstourer Master
  • ****
  • Posts: 611
  • Bike: VFRXDCT
  • City / Town: Sunny Glasgow
  • Country: Scotland, UK
Re: DCT Casing
Reply #3 on: July 10, 2013, 01:50:29 PM
New cover on. Took a couple of minutes. The "star"piece that I replaced is only a plastic guard. The proper clutch case is underneath.
 
£80 for that and a handguard. Ordered in the morning arrived the next, fitted and out for a run with the mates looking like nothing has happened. ;) :)
Logged
#4

Offline Telbert

  • Crosstourer Pro
  • ***
  • Posts: 437
  • Bike: VFR1200XDCT
  • Country: England
Re: DCT Casing
Reply #4 on: July 10, 2013, 01:54:15 PM
*Originally Posted by andyrob [+]
New cover on. Took a couple of minutes. The "star"piece that I replaced is only a plastic guard. The proper clutch case is underneath.
 
£80 for that and a handguard. Ordered in the morning arrived the next, fitted and out for a run with the mates looking like nothing has happened. ;) :)

Hey, good news mate  :028:

Its always horrible when you drop your pride and joy but it sounds like you didn't damage your bike too much. Enjoy your ride out
Logged
#5

Offline andyrob

  • Crosstourer Master
  • ****
  • Posts: 611
  • Bike: VFRXDCT
  • City / Town: Sunny Glasgow
  • Country: Scotland, UK
Re: DCT Casing
Reply #5 on: July 10, 2013, 04:42:40 PM
Cheers. It's the picking up off the big beastie that nearly killed me!  :001:
Logged
#6

Offline frank_b

  • Crosstourer Member
  • **
  • Posts: 72
  • Bike: VFR1200XD
  • Country: Netherlands
Re: DCT Casing
Reply #6 on: July 10, 2013, 07:08:08 PM
*Originally Posted by andyrob [+]
New cover on. Took a couple of minutes. The "star"piece that I replaced is only a plastic guard. The proper clutch case is underneath.


Correct.

Mounted this week the Engine Guard on mine, had to remove this.

Look at install pdf:  http://shop.sw-motech.com/cosmoshop/artikelpdf/mss_01_663_10001_s.pdf

Step 1 DCT example.  5 minutes work
Logged
  or or
Pages: [1]   

Go Up

 


Recent Topics


arab-exile