Author Topic: Auxiliary fog light clamps  (Read 2456 times)

0 Members and 1 Guest are viewing this topic.

Offline Mika

  • Crosstourer Master
  • ****
  • Posts: 953
  • Bike: VFR1200X
  • City / Town: Ayr
  • Country: Scotland
Auxiliary fog light clamps
on: February 23, 2013, 04:09:47 PM
Folks

Needing some help locating a set of clamps that I can use on my Hepco & Becker engine guards that are 25mm in diameter tubing

I have a set of Hella Micro DE fog lights that I had on my GS and want to put on the CT, I can find plenty of new light sets but can't get just the clamps and not having any luck with Google, don't want the expense of buying a complete kit when i have a good set of lights sitting in the garage

Anyone got any ideas where i can get a set?

Cheers

Mika


#1

Offline Nickel

  • Crosstourer Master
  • ****
  • Posts: 620
  • Country: Belgium
Re: Auxiliary fog light clamps
Reply #1 on: February 24, 2013, 01:00:19 PM
*Originally Posted by Mika [+]
Folks

Needing some help locating a set of clamps that I can use on my Hepco & Becker engine guards that are 25mm in diameter tubing
Anyone got any ideas where i can get a set?
Cheers
Mika
Aren't they 27 mm ? Otherwise look at the SW Motech website, they have clamps
http://shop.sw-motech.com/en/by+products/Protection/Light/HAWK+headlight+brackets/index.htm
grtz
Nickel

#2

Offline SPW999

  • Non Active
  • Crosstourer Pro
  • *
  • Posts: 296
  • Bike: VFR1200X-Silver
  • City / Town: Singleton
  • Country: UK
Re: Auxiliary fog light clamps
Reply #2 on: February 24, 2013, 01:22:25 PM
Good Shout Nickel. :002:


Was about to direct to the same site.  Got there before me.  :003:


 :305:     S.

Keep it on the Black Stuff or Dirt - BUT - Rubber Side Down.  Else it hurts!


#3

Offline Mika

  • Crosstourer Master
  • ****
  • Posts: 953
  • Bike: VFR1200X
  • City / Town: Ayr
  • Country: Scotland
Re: Auxiliary fog light clamps
Reply #3 on: February 24, 2013, 06:46:25 PM
Thanks guys, they are still to be fitted and down at my brothers garage who measured them for me.

E mail sent to SW today as the Hawk clamps look as if they will fit the bill  :028: